Larger vehicles like RVs and trailer camps require a good set of leveling blocks on any trip. It’s not possible to sleep comfortably insider trailer that is not level. Old school RVers may pack a shovel to level the ground to park the wheels. But this is not possible at all campsites, especially in city areas where the ground is slope-y, but is covered in concrete.
A good set of leveling blocks will help you park your RV stably regardless of the condition on the ground. This article will give you the best recommendations for leveling blocks that actually do level. Read ahead for out detailed reviews, a table summary, and a short buyer’s guide to make your purchasing process super convenient and informed.
- Features to Consider in Good Leveling Blocks
- Top 10 Best Leveling Blocks 2019
- 1. Tri-Lynx 00015 Lynx Levelers – 10 Pack
- 2. Camco Heavy Duty Leveling Blocks
- 3. Andersen Hitches 2-Pack Camper Leveler, Chock Kit
- 4. Camco FasTen 2×2 Leveling Block For Single Tires (Pack of 10) (44512)
- 5. Camco Yellow Drive On Tri-Leveler
- 6. Beech Lane Camper Leveler 2 Pack
- 7. OxGord Leveler Ramp Chock Multi-Leveling Blocks (Pack of 2) for RV and Trailer Wheels
- 8. Level-Trek LT80010 RV Interlocking Leveling System
- 9. Camco 44423 RV Curved Leveler with Chock
- 10. Ultra-Fab Products 48-979051 Ultra Leveling Block
- Guide to Buying the Best Leveling Blocks
- Related Posts
Features to Consider in Good Leveling Blocks
It can be tricky to find a good set of leveling blocks because some products exaggerate stability and the actual ability to level a heavy trailer. To avoid products with false advertising claims, look for these qualities when you shop for the Best leveling blocks for camper:
Vehicle Compatibility — First of all, the leveling block system must be compatible with the RV, camper, trailer, or any other vehicle you have.
Maximum Load Capacity — Check how much weight the leveling blocks can support before you buy them. You should look up the weight of the model of the RV you own.
Warranty — Want to return a subpar product? Then a warranty can be very useful, even if it’s not absolutely necessary.
Keep the above tips in mind when you browse products to separate the worthy from the duds. You can find more information about buying leveling blocks in the buyer’s guide below.
Top 10 Best Leveling Blocks 2019
Design & Performance
The bright orange leveling blocks sport a modular design. The blocks, when stack together, can withstand the heavy weight of any trailer up to 40,000 obs. Each block is designed to fit any type of leveling function and the blocks can be stacked up in a pyramid shape.
In addition to RVs, you can use this blocks as a stabilizing support base for equipment, as the blocks are made from a plastic and not wood. All in all, these leveling blocks have a number of perks going for them. For starters, the plastic blocks are sturdy and durable. You can easily replace degrading wood blocks with a set of these.
Plus, the blocks sport an interlocking modular design. The idea is to make it easier for a user to stack the blocks to support an RV. Think of these leveling blocks like Legos that fit together. You can use these blocks on any surface, be it grass or asphalt. The blocks can adapt to any situation and don’t require a flat surface to assemble.
The maximum weight supported is quite tremendous at 40,000 lbs. The blocks can interlock to create a very strong support base. The blocks are sturdy individually as well. Each block is a bit small, however. You will need many though as a result to level your RV. Some campers may require more than 10 of these to fully level due to the size.
A pack of 10 may sound a lot, but not when you are working with compact type of blocks. The manufacturer even offers a 10-year warranty for this product. Plus, these leveling blocks come with a nylon bag for storage, the bag is really durably too. These leveling blocks perform amazingly well. If there’s a downside, it’s the slightly small size of individual leveling block. This product is so worth it you won’t regret buying two packs of these.
Design & Performance
The Camco leveling blocks are sport an interlocking design. It can be stacked together and locked like Legos. These Camco heavy duty leveling blocks are designed for both single and dual wheels. You can use these with tandem axles and hydraulic jacks as well.
You won’t be disappointed with all the features these Camco leveling blocks offer. These blocks are engineered to optimize weight and strength. The resin these blocks are made of is UV stabilized. That means the blocks can last even when exposed to harsh sunlight for prolonged periods.
The construction is really strong and durable. You will get a storage bag with a zipper to keep all the blocks together. Using these blocks to level an RV is really easy. The blocks quickly stack together and interlock. You can stack these up to any desired height. The manufacturer, however, recommends stacking up the blocks only 4 inches high.
These Camco blocks are surprisingly versatile. You can use each with many different types of jacks, including stabilizer, tongue, tandem, and 5th wheel jacks. These leveling blocks are generously large as well. Each block measures 8.5 inches on each side. Dirt or dust may build up on these leveling blocks, but in such cases, it’s easy to dislodge the dirt by hosing down the block.
These leveling blocks can withstand weights up to around 40,000 lbs. They can technically withstand any surface. However, on certain dirt or gravelling roads, the blocks may crack. It’s unlikely, but these blocks may not survive certain rough terrain. Users should be cautioned that these blocks don’t drain water and thus can get messy on rainy days.
For the economical price, the downsides of these blocks far outweigh the plus sides. If you want a solid product for your dual-wheel vehicle, then this is it.
Design & Performance
These levelers and chocks are made from plastic. The items included in the kit are all red. The leveler part is about 6 inches wide. Using these levelers are really easy. The levelers have holes in the middle to support heavy weights up to 30,000 lbs. The levelers should be placed on the low side of the camper, not on the opposite side wheels.
Users can drive up to the leveler and then use the chock to lock the wheel in place. It can precisely level a camper between half an inch and 4 inches, which is the total lift height is 4 inches. This leveling kit takes only about 10 minutes to set up and work. However, it should be noted that tire sizes and spacing matters. The smaller the tire, the more ground space clearance the levelers would need.
The tires would need to be further apart than standard tires, which is usually between 2 to 3 inches. These levelers should fit any standard camper or TV tires. If the tire doesn’t fit, the leveler can be trimmed up to 4 inches. This leveler only works with a Class C RV with a GVWR of 11,000. It would work with any camper.
Another downside is the price. The kit costs close to $100. The levelers are not as durable as advertised. The plastic can crack or break under pressure and with prolonged use, which doesn’t really justify the price. This leveling block kit is easy to set up and even easier to use. It’s a bit expensive and durability is questionable.
But if you have a camper, this is probably the safest choice to go with.
Design & Performance
These leveling blocks are plastic and are designed to interlock. The blocks can be stacked up to a desired height. However, they shouldn’t be stacked higher than 4.5 inches when in use. The blocks come in a carrying package with a T-handle. You can carry the blocks like a single giant block without a hassle.
The polyethylene plastic these blocks are made of is resistant to UV radiation. You can leave these out in the sunlight and they won’t fade or crack. Each leveling blocks measures 8.5 x 8.5 inches in a perfect square. The blocks can be used with trailer tongues, stack jacks, and 5th wheel blocks.
These leveling blocks can be stacked for use any way you like. You can drive onto or off the blocks easily. There are many extra perks that come with this leveling block kit, such as the convenient handle that twists on for carrying. The blocks are strongly constructed. However, don’t expect them to not crack.
Super heavy-duty vehicles weighing close to or over 40,000 lbs may cause the blocks to crack. The blocks also can get distorted if you drive off hard. But other than that, these blocks work wonderfully. The tires rest neatly on the hexagonal design of the blocks. Weight is well distributed by the square shape. These leveling blocks don’t slip under the tires, so the safety level is quite superior. However, the blocks can sink into and lost stability in muddy terrain.
These leveling blocks are affordable, well-designed, and very safe to use. They may not be sturdy as some RVs require, but hardly anything else can match the performance of Camco.
Design & Performance
The Tri-Lever is a single leveling block with three levels that gradually decline. In other words, it has a gradient of levels. This leveler can accommodate any tire. You can expect to lift the RV by 3-7/8 inches with this leveler. This leveling block has a load capacity of 4,000 lbs. The surface is non-slip to keep tires in place. The non-slip surface excellently keeps tires of any kind in place.
The load capacity for each block is quite low at 4,000 lbs. But this block won’t lift the whole vehicle up, so it can withstand the weight. The block is quite lightweight and is made from resin. It’s reasonably durable and very easy to store. There’s a built-in handle for carrying.
A single leveling block that costs close to $30 doesn’t sound like much. At least, not until you see the design. This leveling block sports three levels of incline so you can park any tire on it. You will, however, need to buy at least two per side.
It’s easy enough to drive on to this leveler to reach the height you like. Buy you will need a spotter to tell you how high you are parking the RV. The surface of this leveler is won’t slip, but the leveler does have a tendency to slide on the ground. You will have to drive carefully especially if the ground is wet.
This tri-leveler is great mainly because you get three different levels in one go. It’s highly flexible and great for RVs with sensors. A single unit is a bit expensive, but still affordable. The drawbacks are minor so this is overall a great buy.
Design & Performance
The Beech Lane leveler package includes 2 heavy-duty levelers and 2 wheel chocks. You can use the units on any RV with a tire diameter less than 32 inches. The levelers are 15 inches long, 6 inches wide, and 4 inches high. The chocks are of similar height.
The levelers have a load capacity up to 35,000 lbs. You can use these levelers on axle trailers as long as the height requirements are met. This leveler kit promises frustration free setup. You only need to place the two curved levelers on the ground and drive on to them. Then place the wheel chocks to secure the vehicle in place.
It’s super easy to set up compared to interlocking leveling blocks. One caveat though: you may need someone else to watch as you drive up to the levelers. The leveling is really smooth and takes the guesswork out of the job. You can raise the vehicle between half an inch up to 4 inches in height. You can trim these levelers to fit your axle camper.
The surface of the leveler is wide and has added grip to prevent slipping. However, these levelers can sink into the ground, especially if you are parking somewhere muddy. The manufacturer recommends putting a board underneath the leveler to prevent sinking. The board is not included with the package, so that’s a significant downside. Otherwise, the leveler is well made with top-quality polymer. You can expect these units to last. The levelers come with a lifetime warranty.
This is a neat and quick setup leveler set that won’t cost you a fortune. It can sink into the ground, but other than that, everything else is great.
Design & Performance
These are not interlocking levelers. Rather, these levelers are designed like ramps to drive an RV up. The ramp is 22 inches long, 8 inches, wide, and 5 inches high. The ramps are groovy to support different heights. The leveler ramps can raise a vehicle up 3.8 inches. The maximum weight capacity is 11,000 lbs.
You can use this leveler ramps for RVs, motor homes, and trailers. The levelers come with a 1 year limited warranty. These leveling ramps are really more versatile than they let on. You can enjoy the benefits of three levels thanks to the step increment design without having to stack up smaller blocks.
The package is quite affordable too, given that you get two levelers. You can consider this product a quick and easy alternative option for the interlocking stack-up leveling blocks. These work great on any RV or camper. However, you might only be able to use these on a tandem axle camper and not a dual axle camper.
You can use these levelers on RVs and trailer as long as 33 feet. But the maximum weight capacity is 11,000 lbs. Compared to other different types of levelers, the maximum weight capacity supported is quite limited. A conventional RV would easily crush these levelers.
Another problem is stability. These levelers don’t sink, but they can slide on certain types of terrain, mainly concrete. You can expect the levelers to stay still on ground. These levelers are perfect when you are looking for something other than building block levelers. There are some limitations, mainly the maximum weight supported, but overall this is a product well worth the price tag.
Design & Performance
The package includes a dozen leveling blocks, of which 8 are full sized and 4 are half sized. The leveling blocks interlock together. The biggest advantage of this leveling block system is that you can configure a stack as you like. It’s very versatile in how multiple configurations are allowed.
The block set works with even the longer RVs. These blocks work even if your vehicle is around 30 feet long. The kit comes with a lovely nylon carrying case. The blocks are made from a sturdy plastic. The blocks are a bit longer and wider than expected with others in the market. One downside: the bright orange color fades with prolonged use in sunlight.
The blocks are about an inch thick, which is standard. You will really have to stack these up to elevate a trailer from low ground. Another downside is the stability. Though well made, these leveling blocks can slide on surfaces like asphalt or concrete. Other than that, these leveling blocks are great for keeping a trailer well adjusted.
The Level-Trek leveling blocks are convenient and very affordable. Don’t expect fancy features, but they get the job done.
Design & Performance
These levelers are ramp shaped and come with wheel chocks to secure the RV in place. These levelers have a honeycomb design on the surface. The plastic honeycombs make the leveler durable without adding any bulk. This is one of the most lightweight levelers you will find.
This leveler can raise an RV by 4 inches max. This product is compatible with all tandem wheel spacers without requiring additional modification. These are easy, drive-on levelers sporting a thoughtful design. Despite the small looks, these levelers can handle up to 30,000 lbs.
It will work with just about any trailer or a camper. The main advantage is that this leveler can accommodate most wheel spacing. The design of the ramp is curved so you can drive to as much height as you like. Place the wheel chock to “catch” the leveler.
The biggest drawback is that these ramps easily slip on hard ground like asphalt. You may need grippers on the bottom. But if you are on concrete, you will most likely not require any leveling. You can expect these levelers to work on any tires. The levelers are 11 inches long to accommodate most specs.
These Camco leveling ramps are great to benefit from extra lightweightness without losing sturdiness or stability. Compared to other products, this is a bit pricey. But it’s worth it thanks to several essential features.
Design & Performance
These leveling blocks are 8. 3125 inches on each side and are about an inch thick. The blocks stack together and can handle up to 30,000 lbs of weight capacity. The blocks come with a storage bag. The manufacturer offers a 3-year warranty for the product.
These interlocking leveling blocks are quite narrow. But they stack together well. Be aware right away that these blocks might crack if the load capacity is reached. They are known for chipping with prolonged use. But it you have a relatively small RV or an camper, these blocks can do the job without much hassle. The interlocking mechanism is solid and the blocks can hold without slipping.
The blocks have a non-slip surface for the hitches and tires of RVs. You can drive over to the blocks. The blocks will stay still on just about any surface except gravel. These blocks will move around a lot on gravel. The 3-year warranty is solid and you can easily return any faulty blocks in the 10-pack. The blue color of the leveling blocks is a nice change as well.
These leveling blocks don’t really offer anything fancy, but are great for basic leveling needs. As long as you don’t park on graveling roads, these should work out just fine.
Guide to Buying the Best Leveling Blocks
Think buying leveling blocks are easy? But only if you keep the following tips in mind:
Understand the Different Types of Levelers Out There
Leveling “blocks” can be available in many different versions. If you want to buy the best product, you need to be aware of these designs.
Interlocking blocks are the most traditional type of leveling block as many drivers know it. These levelers are available as squares that can be stacked on together to create height. Interlocking blocks often have a maximum height they should be stacked together for RVs. Some interlocking blocks may come with different sized blocks for different configurations. Interlocking leveling blocks are very much like building Legos. Like Legos, setting these up can take some time.
Leveling ramps are curved mini-ramps that a vehicle can be driven onto. You can drive to the leveling ramps until it “catches” and park your RV. Usually, wheel chocks are provided to secure the RV in place. Leveling ramps have many designs. The curved design is similar, but some come with gradient steps whether at least 3 heights are available for parking.
The ramps may sport different designs, like honeycombs, inside to improve support. Some designs are more lightweight than others. Unlike interlocking blocks, you don’t have to set up leveling ramps for long. You only need to place it in the ground and then move. Leveling ramps are great for tires. But if you want to adjust a hitch height, you will need blocks. Ultimately, the choice is up to you.
Does the Material Matter?
Leveling blocks are made from plastic. You may hear materials like resin, polymer, or polyethylene advertised in product descriptions. Just know that all this refer to plastic. You do need to avoid wood levelers.
Wood can slip, crack, or move away under pressure. Therefore, go with a high density plastic that won’t break. You can look for extra features for the material like UV resistance. That means the bright colors of leveling tools won’t fade because of constant sunlight exposure.
Most leveling blocks are “generic,” meaning these can be used with just about any type of RV. However, checking vehicle compatibility is highly recommended. For example, some leveling blocked are designed exclusively for RVs. Others will work with trailers, campers, and other similar vehicles in need of a lift.
Therefore, make sure the types of vehicles the manufacturer recommends matches your vehicle before buying. It’s worthwhile to call up and ask the brand whether your RV is compatible with the model.
Maximum Load Capacity and Trimmablity
Most levelers are significantly sturdy enough to withstand the pressure of a trailer. However, all leveling blocks come with a maximum weight capacity. When buying, make sure the listed number is suitable for your vehicle. It’s important not to exceed the maximum load capacity.
The leveler should match the tire size and the spacing between the wheels. While most leveling blocks will have specifications, others will not. There’s also a new category of leveling blocks that can be trimmed. You can slice off a part to match your RV exactly.
Leveling blocks that are not well protected can slip when you try to drive onto them. Slipping is inevitable in some cases but can be avoided with a steady grip. Grip works two ways. You would want a patterned, non-slip surface to keep the tires intact. On the other hand, the leveling block should slip off on muddy or paved ground. If slipping is a concern, you should be aware of it from the start.