Your Honda vehicle may show a BI service code from its Maintenance Minder. If you own or drive a Honda SUV, car, or truck, then you should have more than just familiarity with the Honda Maintenance Minder System. The Honda Maintenance Minder System provides ongoing information about the vehicle’s oil level.
The appearance of the BI service code may leave you wondering and asking yourself questions like what does a Honda B1 service mean? How do I fix it? When you see a B1 service code, the letter B indicates an oil change and a mechanical inspection, while the number 1 indicates a tire rotation. Keep reading for more details about the Honda B1 service and what it means for you.
What Is Included in Honda B1 Service?
Even though Honda builds its cars to deliver optimum performance, routine maintenance is necessary to maintain your Honda’s safety and efficiency. When a particular servicing or maintenance is needed, the Honda Maintenance Minder will let you know. That’s what the Maintenance Minder System is designed to do.
Just like the system has a B1, it also has an A1, etc. The Honda A1 Service, for example, is telling the driver to change engine oil, rotate tires, check tire pressure, and inspect tire condition. The B1 Service, on the other hand, brings the driver’s attention to basic maintenance tasks such as oil change, oil filter change, emergency brake adjustment, and front and rear brake inspection. But that’s not all. See below for additional implications of the Honda B1 service code.
- Tie-rod ends and steering gearbox and boots need an inspection
- The suspension components need an inspection
- The driveshaft boots need to be examined
- Brake hoses and lines need an inspection. That includes the antilock brake and vehicle stability assist system
- The exhaust system needs inspection
- Fuel lines and connections need to be checked
- All fluid levels (including brake fluids, coolant, and transmission fluids) and their condition needs to be checked
When to Get Honda B1 Service
The Maintenance Minder built into your Honda vehicle is an excellent piece of technology, and the B1 service proves that. The system alerts you about the need for an oil change and tire rotation every 5,000 to 7,500 miles. That’s roughly every six months. Also, a basic mechanical inspection should be performed within the same time frame. If you get the B1 code, be sure to schedule a service appointment as soon as possible. If the service light is getting on your nerve in the meantime, there are simple steps to take to turn it off.
How to Reset the Honda B1 Service Light
The B1 service light serves as a reminder to make an appointment for a B1-related service. You do not need to panic over the appearance of the B1 service light. However, if that B1 service reminder is too much of a distraction than you can endure, the B1 service light is quite easy to reset by following the steps below.
- Turn the ignition key to the “ON” position to activate the dashboard menu
- See if the oil life indicator is visible on your dashboard by looking at the menu behind the steering wheel
- Press Select/Reset a few times until you see the oil life indicator
- The oil life indicator and maintenance code will start flashing after 10 seconds of pressing on it
- Don’t release the button until the oil life indicator resets to 100%. The B1 service light should then disappear
Remember and Don’t Forget
Note that while it’s fairly easy to reset the service light and make the B1 service code disappear from your dashboard, ignoring the advice of your Honda’s Maintenance Service Minder, such as an oil change, can cause preventable damage to your vehicle’s engine.
So, the takeaway is that it’s better to take care of things as soon as possible. The B1 service reminder is there to make sure you don’t forget. Knowing what is covered in the Honda B1 service code and when to go for a Honda B1 service can go a long way in helping you maintain and enhance your vehicle’s health and performance.